It is essential to have an awning installed at your home. Awning will not only offer an easy shelter to you but also remove any need to do unnecessary construction and look for emergency shelter for few days.

Made out of a fabric, which is hoisted to your external walls of the building, awnings will be essential to shelter while there are any meetings or family occasions or while enjoying outside environment.

It will also provide shelter for your car where garage does not exist. However, there can be few common mistakes that may render your awning to fail to offer its intended purpose.

Prefer to choose any company like Bennstroms.Se while selecting your awning and follow these advices:

  1. Failure to select the right fabric

All Awnings are made by using different fabric which differs in quality based on manufacturers. You will need to know if the fabrics you need are weather resistant or not. Some of them can resist the harsher conditions to some extent, while others do not have those natural characteristics.

Therefore, it is important that you must shop for the best fabric that can withstand different weather conditions.

All man-made fabrics that are solution dyed can last longer than any natural fibres. Also, they are quite easy to maintain and quite resistant to rot.

2. Weight consideration

Usually awnings are fixed on your wall mostly above the doors or windows. For fixing them, a suitable structure is needed which may act as support for your fabric.

When selecting right structure for your awning, it is very important to select one that will ideally support its weight.

This can be further enhanced by making sure that fabric you acquire will be light enough and not weigh too heavily on your support structures.

3. Getting the proper dimensions

For providing shelter in exterior wall, usually awnings are used. But if you fail to measure actual wall length where awning is needed then it will be either too large or too small for the area.

If it is excessively large fabric then it will be sagging and be just wastage of fabric. Also, if it is small fabric then the area needed will not be sufficiently catered and look very shoddy.

4. Getting the right kind of supplier to choose the material

There are number of manufacturers dealing with this kind of awnings. All these manufacturers can produce fabrics of different quality. By shopping around to find best manufacturer can ensure that you will get good quality.

This can only be done by personally visiting to their shops and evaluating the fabric that is offered. Getting recommendation from neighbours and contractors will also be essential to make sure that you will get best recommendation.

5. Maintenance procedures

It is important to do proper maintenance for the awning. This will provide your awning with longevity and also ensure your own convenience. One of this is to make sure that fabric will not be stored when it is wet.

Storing in wet condition may result in mildew development and also can produce bad odour.

If it is used for outdoor activities and if it rained then it is very essential to dry it up before storing.

Leave a Reply

Your email address will not be published. Required fields are marked *